Passat V6-2.8L (ATQ) (2004)
Continuation for all vehicles
-
Remove cover from left wheel housing, if present (arrows).
-
Remove left protective plate for axle shaft (arrows). Third bolt cannot be seen in picture.
-
Disconnect left axle shaft -1- from transmission.
Vehicles with 4-cylinder engine or 6-cylinder Diesel engine
-
Remove bolt (arrow) and pull out slave cylinder toward rear.
Note: Do not depress clutch pedal.
Vehicles with 8-cyl. injection engine
-
Remove bolt (arrow -2-) and pull out slave cylinder with heat shield (arrow -1- toward rear.
-
Remove heat shield from slave cylinder.