Passat V6-2.8L (ATQ) (2004)
^
Align clutch pivot pin and brake pedal so that it protrudes out of mounting bracket on clutch pedal side - arrow -.
^
Press clutch pedal to stop and insert over-center spring into mount on clutch pedal.
^
Connect clutch pedal to pivot pin and press it toward left until securing clip can be installed.
^
Connect master cylinder to clutch pedal and engage bolt lock in clutch pedal.
^
Tighten bolt - arrow 2 - if both securing clips ( - arrow 1 - ) for clutch pedal, securing clip for brake pedal (not depicted) are installed on pivot pin
for clutch pedal/brake pedal.
^
Adjust Clutch Pedal Switch F36.
Master Cylinder, Removing and Installing
Master cylinder, removing and installing, 01A, 5 SPD. M/T (AWD)
Special tools, testers and auxiliary items required
Hose clamp 3094
Torque wrench V.A.G. 1331
Removing
^
Check whether a coded radio is installed. If so, obtain anti-theft coding.