Passat V6-2.8L (ATQ) (2004)
/Page-2120008.png)
^
Tighten mounting bolts - 3 - and - 4 -for master cylinder with brake booster.
^
Tighten mounting bolt - 1 - for brake fluid reservoir - 2 -.
^
Connect harness connector to Brake Fluid Level Warning Switch F34 on brake fluid reservoir.
^
Press in clip - C - in direction of - arrow - to stop.
^
Insert hose/line assembly - B - in master cylinder until it engages audibly.
^
To check, pull on hose/line assembly.
^
Insert rubber grommet - D - for return hose - A - into bulkhead.
^
Push return hose - A - to stop onto connecting tube of master cylinder.
^
Remove hose clamp 3094.
^
Tighten bolt - arrow - for mounting pedal assembly to instrument panel carrier.
^
Connect master cylinder to clutch pedal. Engage new bolt in clutch pedal.
^
Bleed clutch system after installing master cylinder.
Tightening torques
Overview
Overview, 01A, 5 SPD. M/T (AWD)
