Passat V6-2.8L (ATQ) (2004)
^
Remove bolt for brake fluid reservoir - 1 - and disconnect connector for Brake Fluid Level Warning Switch F34 downward.
Brake fluid reservoir is not removed.
^
Disconnect vacuum line to brake booster - 1 -
^
Remove Torx bolts - arrows -
For clarity, brake fluid reservoir is not designated in illustration.
To remove upper Torx bolt, brake fluid reservoir must be swung gently to side.
^
Remove storage compartment on drivers side.
Release operating rod/master cylinder from clutch pedal as follows:
^
Insert a standard needle-nose pliers - 1 - into clutch pedal recesses.
^
Press mount - 2 - together.
^
Pull clutch pedal gently into passenger compartment.
^
Pull operating rod and mount to engine compartment from clutch pedal direction of - arrow -