Passat V6-2.8L (ATQ) (2004)
Drive/Propeller Shaft: Service and Repair
01V, 5 SPD. A/T (AWD)
Assembly Overview
Assembly overview, 01V, 5 SPD. A/T (AWD)
Disassembly and assembly sequence.
^
Repair work must not be performed on the propshaft.
^
If propshaft is only removed from transmission or only from rear final drive, propshaft must be tied up or supported.
^
Remove and install propshaft using alignment fixture 4W dr. shaft 3298 or using alignment fixture 4W dr. shaft 3405.
^
Do not bend propshaft, only store and move when fully extended.
^
If there are complaints (noises, vibrations), adjustment must be checked before replacing propshaft.