Passat V6-2.8L (ATQ) (2004)
Installing
^
Coat outer circumference and sealing lips of sealing ring with axle oil.
^
Fill area between sealing lip and dust lip halfway with sealing grease G052128A1.
Installation position: The open side of the sealing ring faces the transmission.
^
Drive new seal in as far as the stop; be sure not to distort seal.
^
Install right flanged shaft.
^
Screw in bolt for flanged shaft - arrow - and secure against turning using a drift.
^
Install right drive axle - 1 -.
All vehicles
^
Install shielding plate/drive axle - arrows - on right side. Third bolt is not visible in the illustration.
Vehicles with TDI engine