Passat V6-2.8L (ATQ) (2004)
-
Note various securing methods when installing connecting rod:
-
Adjust selector mechanism.
-
Install driveshaft.
-
Adjust driveshaft.
Transmission mounting to transmission support and subframe
-
Reconnect exhaust system and ensure it is not under stress.
Tightening torques
Gear selector lever housing to body ........................................................................................................................................................................ 10 Nm
Selector rod to transmission .................................................................................................................................................................................... 25 Nm
Push rod to transmission .......................................................................................................................................................................................... 40 Nm
Connecting rod to transmission ............................................................................................................................................................................... 25 Nm
Selector Mechanism As of 01/01
Selector mechanism as of 01/01
-
Align gear selector lever so that it tilts slightly toward right (arrow) and slightly to rear.