Passat V6-2.8L (ATQ) (2004)
Continued for all selector mechanism
-
Tighten selector rod bolt to prescribed torque
-
Position of gear selector lever must not be changed during procedure.
Functional check
Gear selector lever must rest in 3rd/4th gear gate when transmission is in neutral.
-
Operate clutch.
-
Select all gears several times. Pay particular attention to operation of reverse gear lock.
Gear selector lever must move from reverse gear gate into 3rd/4th gear gate on its own.
Should a gear fail to engage smoothly after repeated selection:
-
Repeat selector adjustment.
-
Install cover for gear selector lever housing and tighten bolts to prescribed torque
-
Install gear selector lever knob and cover.