Passat V6-2.8L (ATQ) (2004)
Selector Mechanism, Removing and Installing
Selector mechanism, removing and installing, 012/01W, 5 SPD. M/T
Removing
^
Carefully pry off cover from center console.
^
Remove shift knob with cover.
^
Rubber cover for shift mechanism housing must be removed - arrows -.
^
Now unscrew securing nuts for shift mechanism housing - arrows -.
^
Remove exhaust system behind catalytic converter, remove front exhaust system, if necessary.
^
Remove shift mechanism from transmission as follows:
^
Remove shift rod - arrow A -.
^
Remove pivot rod, unscrew hex socket bolt, to do so - arrow B -.
^
Remove shielding plate over exhaust system.
^
Swing shift mechanism housing together with shift rod and pivot rod downward and remove.
Installing
Installation is performed in the reverse order of removal.
Adjust shift mechanism.