Passat V6-2.8L (ATQ) (2004)
Seals and Gaskets: Service and Repair
Rear Flanged Shaft Oil Seal, Replacing
Rear flanged shaft oil seal, replacing, 01V, 5 SPD. A/T (AWD)
^
Observe general repair notes.
(Transmission in vehicle)
Special tools, testers and auxiliary items required
Pressure piece 3402
Torque wrench 550 Nm V.A.G. 1331
^
Sealing grease G052128A1
Removing
^
Remove front exhaust system with catalytic converter.
^
Remove heat shield - A - from vehicle floor.
^
Remove cover plate - B - - arrows -.
^
Disconnect propshaft from transmission.
^
Place drip tray V.A.G. 1306 underneath.
^
Drain axle oil in transfer case.