Passat V6-2.8L (ATQ) (2004)
Seals and Gaskets: Service and Repair
Sealing Ring In Drive Pinion, Replacing
Sealing ring in drive pinion, replacing, 01V, 5 SPD. A/T (AWD)
^
Observe general repair notes.
Special tools, testers and auxiliary items required
Thrust piece 3403
^
Sealing grease G052128A1
An inspection opening is provided on the left side of the intermediate flange - arrow - to check for oil leaks for the sealing ring in drive pinion and the
sealing ring in intermediate flange.
Removing
^
Remove transfer case.
^
Remove intermediate flange for front final drive.
^
Remove intermediate pinion - 2 - for front final drive from transfer housing.
^
Pull drive pinion - 3 - from output shaft.
Spur gears which have fallen to the floor may no longer be installed. The transmission must be replaced.
Output pinion - 1 - remains on the drive pinion.
^
Drive out sealing ring using drift
Installing