Passat V6-2.8L (ATQ) (2004)
Windshield Washer Reservoir: Service and Repair
Washer Fluid Reservoir From 10.00, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
-
Move lock carrier and front bumper reinforcement into service position
-
Remove left front wheel housing liner
NOTE:
-
On vehicles equipped with 1.8L Turbo engines, it may also be necessary to remove the intercooler
-
It may also be necessary to remove the horns.
-
Remove screws -arrows-, lift out power steering reservoir and carefully lay to one side (hoses remain connected.).
-
Remove fastener -arrow- at long member.
-
Disconnect electrical connections -1-, -3 and -5-.
-
Separate hose -7- from pump -6-.
-
On vehicles with headlight washers, separate hose coupling -4- from pump -2-.
-
Remove screws -arrows- and remove reservoir assembly.