Passat 4Motion V6-2.8L (ATQ) (2005)
-
Release and remove connector from control module in the direction of - arrow -.
-
Disconnect connector from brake pressure sensor.
-
Install brake pedal loading device V.A.G 1869/2.
-
Depress brake pedal with brake pedal loading device V.A.G 1869/2.
-
Connect bleeder bottle hose to left front brake caliper bleeder screw and open bleeder screw.
-
Close left front bleeder screw.
-
Place lint-free cloths under the control module and hydraulic unit.
Make sure no brake fluid gets onto contacts.
-
Disconnect brake lines from the hydraulic unit.
-
Plug brake lines and threaded holes with sealing plugs from the repair kit Part No. 1H0 698 311 A.