Passat 4Motion V6-2.8L (ATQ) (2005)
1. Brake caliper
2. Bonded rubber bushing
3. Wheel bearing housing
Aluminum
4. Multi-point socket head bolt
^
4 bolts
^
80 Nm plus an additional 90° 1/4 turn
^
Replace each time
5. Washer
6. Self-locking hex nut, 95 Nm
^
Replace each time
Tighten nuts in unloaded condition!
7. Eccentric washer
8. Eccentric bolt
9. Brake disc
10. Hex socket head bolt
11. Wheel hub
12. Wheel bearing
13. Shield plate
14. Lower control arm
15. Front bonded rubber bushing for lower control arm
Pressing out is extremely difficult or in some cases impossible!
If bonded rubber mounting is faulty replace complete control arm.
16. Rear bonded rubber mounting for lower control arm
17. Hex head bolt, 55 Nm