Passat 4Motion V6-2.8L (ATQ) (2005)
6. Speed sensor
^
Disconnect out to remove
^
Before inserting sensor, clean inner surface of mounting hole and coat with Polycarbamide grease G 000 650
7. Clamping sleeve
^
Before inserting into wheel bearing housing, coat circumference with grease G 000 650
^
Press into wheel bearing housing onto stop
Pressing wheel hub out of 75 mm diameter wheel bearing housing
Pressing wheel hub out of 82 mm diameter wheel bearing housing
Pressing wheel bearing out of 75 mm diameter wheel bearing housing
Pressing wheel bearing out of 82 mm diameter wheel bearing housing