Passat GLS L4-1.8L Turbo (AUG) (2001)
Trunk / Liftgate Lock Cylinder: Service and Repair
From 10/2000
Trunk Lid Lock And Lock Cylinder Carrier, Assembly Overview
Trunk Lid Lock And Lock Cylinder Carrier, Assembly Overview 10.00 -->
1
-
Lock cylinder carrier
-
Removing:
- Disconnect harness connectors for license plate light, positioning motor for central locking system and switch on lock cylinder.
- Unclip Bowden cable - 5 - from lock. then, Remove nuts - 2 -.
- Now, lock cylinder carrier can be removed from trunk lid.
-
Installing:
- Installation is reverse of removal.
2
-
Nut
-
Qty 4
-
7 Nm
3
-
License plate backing
-
Press on only on hatched area.
-
Replacement part has two foils. first foil covers adhesive surface, second must be removed after installing.
4
-
Pop rivet
-
Pull in using Pop rivet tongs V.A.G 1765 A
5
-
Bowden cable
6
-
Nut
-
Qty 2
-
7 Nm