Passat GLS L4-1.8L Turbo (AUG) (2001)
/Page-2303011.png)
Pulling in front bonded rubber mounting
-
Coat bonded rubber mounting with e.g. tyre assembly paste.
-
Insert segments -3372/2- in tube -3372-
-
Pull in mounting -A- until the thrust piece -3372/1- aligns with the upper edge of tool -3372-.
Continued
-
Lift tube -3372- and remove segments -3372/2-.
-
Replace bridge -3351/4- with thrust piece -3351/1 and then push mounting in onto stop.
