Passat GLS L4-1.8L Turbo (AUG) (2001)
4 - 5 Clamping sleeve
^
Always replace
^
Left and right hand identical
^
Coat circumference with grease, before inserting into wheel housing G 000 650
^
Push into wheel bearing housing up to stops
6 - Wheel bearing/hub module
7 - Hex bolt
^
Always replace each time after removing
Removing and installing speed sensor on rear axle
Removing
^
Remove rear seat.
^
Remove lower C pillar trim.
^
Unscrew and remove screws from side trim (arrows).