Passat GLS L4-1.8L Turbo (AUG) (2001)
^
3409 Wedge
^
Piston resetting tool
Removing
^
Force piston out of brake caliper housing using compressed air.
Note: Place a wooden board into the recess of the caliper housing to prevent damaging the piston.
^
Remove seal using 3409 wedge.
Note: When removing make sure that the surface of the cylinder is not damaged.
Installing
^
Use only appropriate solvent to clean surfaces of the piston and seal, then dried.
^
Apply a thinly coat of paste G 052 150 A2 to piston and seal before installing.
^
Install oil seal in brake caliper housing.