Passat GLS L4-1.8L Turbo (AUG) (2001)
/Page-793003.png)
-
Connect multimeter to terminals 2 + 6 of connector to make voltage measurement.
-
Switch ignition on. Specification: at least 4.5 V
-
Switch ignition off.
-
Connect multimeter to terminal 2 of connector and Ground (GND) for voltage measurement.
-
Switch ignition on. Specification: at least 4.5 V
-
Switch ignition off.
If specified values are not obtained:
-
Connect VAG 1598/31 adapter cable to control module wiring harness. Engine Control Module (ECM) is not connected.
