Passat GLS L4-1.8L Turbo (AUG) (2001)
/Page-1564002.png)
-
Measure distance -a- at three places and calculate mean.
Specification: 26 to 28 mm
Note: The measurement fakes place on the milled surface of the cylinder block.
If measured value is less than specified value:
-
Remove drive plate again and use spacer washer-2-. Tighten bolts to 30 Nm again.
-
Tighten bolts to 60 Nm and turn an additional 90° (1/4 rotation, additional rotation may occur in several stages).
