Passat GLS 4Motion V6-2.8L (ATQ) (2002)
/Page-2188005.png)
-
Unscrew hex bolts -A-.
-
Loosen hex bolts -B- until the subframe can be taken out.
INSTALLING
-
Install subframe and start hex bolts -A- and -B-.
-
Guide both track-control and guide links into subframe.
-
Install bolts into the inner holes -arrows-.
-
Using transmission jack VAG 1383A, raise back of subframe slightly.
The subframe must be attached to the body with the help of special tool 3393 before tightening.
