Passat GLS 4Motion V6-2.8L (ATQ) (2002)
/Page-2189003.png)
-
Unbolt vehicle speed sensor wiring -2-.
1. Securing pin
-
Unclip vehicle speed sensor wiring from axle beam.
3. Securing point to axle beam
-
Disconnect ABS vehicle speed sensor from wheel bearing housing.
Vehicles with automatic headlight range control
-
Remove nut -arrow A- from coupling rod -1- for vehicle attitude sensor -2- while counterholding on wrench surfaces -arrow B-.
-
Pull coupling rod -1- in direction of arrow out of vehicle attitude sensor-2-.
3. Upper control arm
Continued for all vehicles
-
Remove control arm from shock absorber.
1. Control arm
2. Parking brake cable
3. Shock absorber bolt
A- Parking brake cable retaining clip
