Passat GLS 4Motion V6-2.8L (ATQ) (2002)
-
Clean drive chain and chain sprocket before removing and mark (paint etc.) opposite arrows on bearing caps. Distance equates to 16 rollers on
chain.
Note:
Do not mark chain with a center punch or similar means!
-
Secure camshaft adjuster now with retainer 3366
Note:
Do not over tighten retainer 3366 otherwise the camshaft adjuster will be damaged
-
Remove camshaft adjuster -6-.
-
Remove bearing caps 1, 3, 5 and 7
-
Loosen bearing caps 2 and 4 off alternately and diagonally.
-
Take out both camshafts together with camshaft adjusters.
Installing
Conditions