Passat GLS 4Motion V6-2.8L (ATQ) (2002)
Compressor Clutch: Service and Repair
A/C Clutch -N25-, Servicing (Denso)
Special tools, workshop equipment, test and measuring appliances and auxiliary items required
Not illustrated:
-
Torque wrench (5 - 50 Nm)
-
Locally available two-arm puller (e.g. Kukko 20-10) with fixtures for a depth of 100 mm.
-
Locally available strap wrench
-
Depth gauge
NOTE:
-
Refrigerant circuit does not need to be opened to service the A/C clutch.
-
If unable to service A/C clutch on compressor installed in vehicle, discharge refrigerant and remove compressor from compressor bracket.
1
-
Hex head combination bolt
-
15 Nm (11 ft lb)
-
Removing and installing See Fig. 1
2
-
Clutch plate
-
Removing See Fig. 2
-
Checking clutch plate gap See Fig. 4
3
-
Shims