Passat GLS 4Motion V6-2.8L (ATQ) (2002)
Alignment: Service and Repair
Rear Axle Toe
Adjusting
-
Loosen hex nut for eccentric bolt -1-.
Note: The maximum adjustment range of the adjustment screw is 90° to the left or right of center.
-
Turn eccentric bolt until the specification is obtained.
-
Tighten hex nut for eccentric bolt -1-.
-
Now check toe values again.
Specifications for vehicle alignment.
Toe constant "S", adjusting
-
Loosen nut -A-.
-
Unscrew bolt -B- approx. 4 mm.
-
Push toe rod joint downward onto stop.
-
Screw in adjustment bolt -B- until the exact specification is achieved.
-
Tighten hex nut -A- and check value.
Always use new hex nuts!