Passat GLS 4Motion V6-2.8L (ATQ) (2002)
1 - Pedal cluster mounting bracket
2 - Clip
3 - Brake light switch -F with brake pedal switch -F47
Make sure there is secure installation, install brake light switch only once.
4 - Clutch pedal switch -F36-
Installation is to be done for brake light switch -F-
Installing brake light switch
^
Clip installed in mounting bracket
^
Brake pedal not depressed
^
Insert the switch -3- into installed clip -2-.
^
Press it in until the plunger touches the brake pedal.
^
Check operation of brake light switch
Checking adjustment after installation
1 - Brake pedal
2 - Mounting bracket
3 - Brake light switch -F with brake pedal switch -F47
Dimension a = maximum 0.7 mm