Passat GLS 4Motion V6-2.8L (ATQ) (2002)
-
Align upper links, dimension -A- = 47 " 2 mm.
-
Tighten hex bolts -1- for both links.
-
Insert suspension strut with mounting bracket into suspension turret. Tighten hex bolts - 1-.
Note: Make sure that washers are seated correctly.
-
Insert suspension strut forked head into link.
-
Bolt suspension strut to lower link.
-
Tighten new nut -1-.
-
Insert upper links into wheel bearing housing and tighten new nut -2-.
-
When tightening press upper links downward as far as possible!
-
Connect ABS wiring into retainer on brake caliper.
-
Install wheel and tighten.