Passat GLS 4Motion V6-2.8L (ATQ) (2002)
-
Drive spring pin -1- out of transmission selector lever -2- -arrow- until transmission selector lever can be removed from selector shaft.
-
Pry seal out with a screwdriver.
Installing
-
Apply ATF to circumference and sealing lips of seal.
Installation position:
-
Open side of seal faces transmission.
-
Drive in new seal until thrust piece contacts stop. Ensure that seal remains straight when doing this.
-
Push transmission selector lever onto selector shaft and knock in roll pin.
-
Carefully press selector lever cable onto selector shaft lever using a pair of pliers. When doing this, take care not to bend the selector shaft lever,
otherwise the selector mechanism will not be able to be adjusted correctly.
-
Install multi-function switch.