Passat GLS Wagon L4-1.8L Turbo (AWM) (2002)
-
Remove bolt - 1 - from grip cavity.
-
Position wedge T10039/1 in area of steel clips and unclip trim - 2 - from rear lid using Release Lever T10039.
-
Unhook clip - 3 - and unhook Bowden cable - 4 - from operating lever - 5 -.
Installing
-
Installation is the reverse order of removal.
NOTE: Before installing, check and if necessary replace steel clips.
Rear Lid Trim, Removing and Installing (Wagon)
Rear Lid Trim, Removing And Installing (Wagon) 10.00 -->