Passat GLS Wagon V6 V6-2.8L (ATQ) (2001)
/Page-1843003.png)
^
Disconnect vacuum hose -2- from brake vacuum pump -V192-.
^
Remove clip -1-.
^
Remove brake vacuum pump -V192 upwards in direction of arrow.
Installing
Install in reverse order.
Checking brake vacuum pump -V192-
Special tools and workshop equipment required
^
VAS 5051 Vehicle diagnosis, testing and information system
^
Diagnosis cable VAS 5051/1 or VAS 5051/3
Work sequence
^
With ignition switched off, connect tester VAS 5051 to diagnosis cable VAS 5051/1 or VAS 5051/3.
^
Switch on tester-arrow-.
Now the tester requires approximately 3 minutes to warm up.
^
Switch on ignition.
^
Select mode of operation: press button on touch screen for "On Board Diagnostic (OBD)".
