Passat GLS Wagon V6 V6-2.8L (ATQ) (2001)
Oil Pan: Service and Repair
Oil Pan Lower Section, Installing With Fluid Seal
Oil Pan Lower Section, Installing with Fluid Seal
Special Tools and Workshop Equipment Required:
-
Torque Wrench -V.A.G 1331-
-
Silicone Sealant -D 176 404 A2-
-
Hand Drill with Plastic Brush Attachment
-
Flat Scraper
-
Protective Eyewear
Procedure
NOTE:
Replace seals.
CAUTION!!
A fluid seal must be used on engines that were originally equipped with a rotating plastic brush.
WARNING!!
Wear Safety Glasses.
-
Clean sealing surfaces so they are completely free of any oil or grease.
-
Cut tube nozzle at front marking (Nozzle 0 approximately 1 mm).