volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Sensors and Switches - A/T > < A/T - MIL ON/DTC 17125/P0741 Set|Page 6989
Page 4
background image

Only remove the gearbox and replace the torque converter if the values differ.

-

Refer to Repair Manual Group 37, Transmission removing and installing for transmission removal instructions.

-

Refer to Repair Manual Group 32, Torque Converter for torque converter replacement instructions.

-

01 L, 01V transmissions, built after serial codes listed in table, are fitted with an improved torque converter.

NOTE:  Care must be taken to properly install and seat the torque converter to the transmission pump. Failure to do so will result in immediate
damage.

Tip: It is not necessary to receive an authorization number from the Technicians Helpline for the repair described in this Bulletin.

Attach VAS 5051 / VAS 5052 print-out to repair order. Warranty claims received without VAS 5051 / 5052 print-outs may be denied.

Warranty

Required Parts and Tools

No Special Tools required. Always see ETKA for the latest part(s) information.

Sensors and Switches - A/T > < A/T - MIL ON/DTC 17125/P0741 Set|Page 6989