Passat GLS Wagon V6 V6-2.8L (ATQ) (2001)
-
Knock new left-hand flange shaft oil seal in 5.5 mm below housing outer surface, do not cant seal when doing this.
-
Knock flange shaft in with drift VW 295.
-
Bolt drive shaft to flange shaft.
-
If part of vehicle equipment refit drive shaft cover plates.
-
Check transmission oil.
Tightening torques
Drive shaft to flanged shaft M8 45 Nm
Drive shaft to flanged shaft M10 70 Nm
Cover plates above the drive shafts to transmission 20 Nm