Passat GLX V6 V6-2.8L (ATQ) (2001)
/Page-2445001.png)
Cowl Moulding / Trim: Service and Repair
Plenum Chamber Cover, Removing And Installing
Removing
-
Removing water deflectors.
-
Unbolt wiper arm.
CAUTION: Plenum chamber cover must not be pried off using a tool (wedge). Window will be damaged and may crack later.
-
Lift plenum chamber cover - 1 - at windshield edge.
-
Remove plenum chamber cover - 1 - starting from windshield edge at right angle out of mounting slit at lower edge of windshield.
