Passat GLX V6 V6-2.8L (ATQ) (2001)
Glove Compartment Lock Cylinder: Service and Repair
Lock Cylinder For Glove Compartment, Removing And Installing
Removing
-
Protect marked area of flap - 1 - and - 2 - from damage, e.g. cover with tape.
-
To prevent damage to glove compartment, wrap marked area of water pump pliers - 3 - with adhesive tape.
-
Insert ignition key - 1 - into lock cylinder - 2 -.
-
Using water pump pliers, push lock cylinder out of button - 3 - - arrow -.
Installing
-
Press lock cylinder into button opening until it engages audibly.