Passat GLX V6 V6-2.8L (ATQ) (2001)
1 - Mounting bracket for pedal assembly
2 - Clip
3 - Brake light switch -F-
Note: In order to assure sufficiently secure fitting, brake light switch must not be installed more than once.
4 - Clutch vacuum vent valve switch -F36-
Mounting procedure resembles procedure for brake light switch -F-
Installing brake light switch
^
Clip integrated in mounting bracket
^
Brake pedal not depressed
-
Guide the switch -3- into the mounted clip -2-.
-
Then press it in far enough that the plunger is resting at brake pedal.
Checking adjustment after installation
1 - Brake pedal
2 - Mounting bracket
3 - Brake light switch -F
Adjustment dimension a = maximum 0.7 mm