Passat GLX V6 V6-2.8L (ATQ) (2001)
Braking Sensor/Switch: Adjustments
Brake Light Switch (F) and Brake Pedal Switch (F47)
Adjusting brake light switch (F) and brake pedal switch (F47)
^
Remove driver's side stowage tray.
Mounting bracket with threaded hole for the brake light switch.
1 - Brake light switch
2 - Hexnut, M12 x 1.5
3 - Brake pedal
There is a spring ring between nut -2- and pedal bracket (not visible in illustration).
Before adjusting the brake light switch, make sure the brake pedal is in the rest position.
^
Screw in and out brake light switch until dimension -A- = 0.1 ... 0.5 mm is set.
^
Tighten nut -2- to 4.5 Nm.
^
Reinstall driver's side stowage tray.
^
Check operation of brake light switch
Mounting bracket with clip for brake light switch.