Passat GLX V6 V6-2.8L (ATQ) (2001)
On the right-hand side, ABS wheel speed sensor wiring -1- must be routed between the fuel lines -2-.
Checking rotor on rear axle
Special tools and workshop equipment required
^
80-200 pry lever - removing outside mirror
^
Raise vehicle.
^
Pry ABS wheel speed sensor out of wheel bearing module using special tool 80-200.
^
Check rotor for damage and dirt by looking through speed sensor mounting hole in wheel bearing housing.
^
If rotor is damaged or dirty, remove wheel bearing module and replace.