Passat GLX V6 V6-2.8L (ATQ) (2001)
Brake Pad: Service and Repair
Rear Brakes
Rear wheel disc brakes
Brake pads, removing and installing
Special tools and workshop equipment required
^
3272 Reset and screwout tool
^
3272/1 Reset and screwout tool plate
^
VAG 1331 Torque wrench (or equivalent)
Removing
Note: When removing, mark brake pads if they are to be reused. Install in their original position to prevent uneven braking!
^
Remove wheels.
This work sequence is only valid for vehicles with Front Wheel Drive (FWD)
^
Pull out securing clip -1- and unhook parking brake cable from brake caliper.
Continued for all vehicles