Passat GLX V6 V6-2.8L (ATQ) (2001)
^
Remove protective seal out of piston groove using 3409 wedge.
^
Remove piston.
Note: When removing make sure that the surface of the cylinder is not damaged.
^
Remove protective seal using 3409 wedge.
^
Remove seal using 3409 wedge.
Note: When removing make sure that the surface of the cylinder is not damaged.
Installing
^
Clean surfaces of the piston and seal (use only appropriate solvent) then dry.
^
Apply a thin coat of paste G 052 150 A2 to piston and seal before installing.
^
Install oil seal in brake caliper housing.