Passat GLX V6 V6-2.8L (ATQ) (2001)
Engine Side Components Overview
1. Connection for thermostat
2. O-ring - Always replace
3. Coolant thermostat - Observe installation position
Checking: heat-up thermostat in water
Opening commences approximately 86° C
Opening lift min. 7 mm
4. Breather bolt. Torque Specification: 20 Nm (15 ft. lbs.)
5. Bolt. Torque Specification: 25 Nm (18 ft. lbs.)
6. Retaining clip - Check seated securely
7. Coolant - temperature sender (G62) for engine control module
8. Rear coolant hose
9. Lifting eye
10. Bolt. Torque Specification: 10 Nm (7 ft. lbs.)
11. Coolant hose
12. Front coolant hose
13. Cap. Test pressure: 1.4 - 1.6 bar (20 - 23 psi)
14. O-ring - Replace if damaged
15. Expansion tank
16. Upper coolant hose - Secured to radiator with retaining clip
Check securely seated
18. Rear toothed belt guard