Passat GLX V6 V6-2.8L (ATQ) (2001)
/Page-2141012.png)
^
Reinstall battery tray
^
Reinstall nuts and bolt -arrows- and tighten to 25 Nm (18 lbs.-ft.)
^
Reinstall battery
^
Reinstall battery hold down bracket, install bolt - arrow - and tighten to 25 Nm (18 lbs.-ft.)
^
Check battery for proper seating after installation
^
Reconnect angled connector -arrow- of central gas vent from battery (if present)
^
Connect positive battery cable (POS) to positive (+) battery terminal
-
Tighten nut to 5 Nm (44 lbs.-in.)
Section G - Seal Pollen Filter Housing
-
Remove plastic trough from pollen filter housing -arrows-
