Passat GLX V6 V6-2.8L (ATQ) (2001)
-
Remove pollen filter -2-
-
Remove nuts -3-
-
Remove pollen filter housing -1-
-
Remove original seal from pollen filter housing arrows-
-
Install approximately 30 in. of sealer (AKD 497 010 04 NAR) in place of original seal around perimeter of pollen filter housing - arrows-
TIP:
-
Prevent sealer from contacting foam seal, as it could allow water to leak into cabin area
-
Ensure that sealer thickness is uniform around entire perimeter of pollen filter housing and no gaps are present
-
Reinstall filter housing -1-
-
Reinstall nuts -3- and tighten to 2 Nm (18 lbs.-in.)
-
Reinstall removed pollen filter -2-
TIP: Pollen filter replacement is not covered under this campaign.