volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Idle Speed|Specifications|Page 2092 > < Idle Speed|Specifications|Page 2090
Page 2
background image

-

Perform a road test.

The following operating conditions must be obtained during road test:

-

Coolant temperature must rise to above 80°C.

-

Once the temperature is reached, the following conditions
idle
Partial throttle
Wide Open Throttle (WOT)
Deceleration mode must be reached several times each.

-

Engine speed must be increased to above 3500 RPM during Wide Open Throttle (WOT).

-

Check control module's DTC memory again.

-

Test operating conditions of engine. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Component Tests and
General Diagnostics/Engine Operating Conditions, Checking 

-

Repeat idle test.

If expected values are still not obtained:

-

Test throttle valve control module. See: Powertrain Management/Computers and Control Systems/Electronic Throttle Control Module/Testing and
Inspection 

If no DTC can be found here:

-

Test Heated Oxygen Sensors (HO2S) and oxygen sensor control. Refer to Oxygen Sensor Before Catalyst, Checking/Sensors and Control Check   
See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Testing and Inspection

-

Check intake system for unmetered air.   See: Powertrain Management/Fuel Delivery and Air Induction/Testing and Inspection 

Idle Speed|Specifications|Page 2092 > < Idle Speed|Specifications|Page 2090