Passat GLX V6 V6-2.8L (ATQ) (2001)
/Page-1096003.png)
-
Connect multimeter to terminals 2 + 6 of connector to make voltage measurement.
-
Turn ignition on.
Specification: at least 4.5 V
-
Switch ignition off.
-
Connect VAG 1598/31 test box to control module wiring harness. Engine Control Module (ECM) is not connected.
-
Check wires between test box and connector for breaks (see wiring diagram):
Terminal 1 + socket 92
Terminal 2 + socket 83