Passat GLX V6 V6-2.8L (ATQ) (2001)
On the display the Control Module identification and coding are displayed, e.g.:
If coding differs from vehicle version:
-
Check Engine Control Module code See Engine Control Module (ECM), coding.
Indicated on display:
Select diagnostic function:
At this point all diagnostic functions are available.
-
Press desired function on display.
NOTE: For additional Steps, see repair procedures.
On Board Diagnostic (OBD), Initiating
On Board Diagnostic (OBD), initiating
NOTE: The following description refers only to the VAG 1551 Scan Tool (ST).
Connecting VAG 1551 Scan Tool (ST) and selecting functions (checking module version)
NOTE: Connect Scan Tool (ST).
-
Switch on ignition.
Indicated on display:
VAG - On Board Diagnostic (OBD)
HELP
1- Rapid data transfer*
2- Blink code output*
* Two operating modes are displayed alternately
-
Press button -1- to select "Rapid data transfer" operating mode 1.
Indicated on display:
Rapid data transfer
HELP
Enter address word XX