Passat GLX V6 V6-2.8L (ATQ) (2001)
/Page-1142003.png)
Readout, top line
-
6N0 909 901 = Control module identification (example only)
-
Gateway K <-> CAN = System designation 1)
-
0001 = Software version
Readout, bottom line
-
Coding XXXXX: Coding dependant on engine version and optional equipment.
-
WSC 00000 = Workshop code
1) The CAN-bus On Board Diagnostic Interface -J533- (which is integrated into the instrument cluster) is identified as "Gateway".
-
Press -> button
Indicated on display (select function):
Rapid data transfer
HELP
Select function XX
Available functions
Function
02 -
Diagnostic Trouble Code (DTC) memory, checking
05 -
Erase DTC memory
06 -
End output
07 -
Control module, coding
08 -
Read measuring value block
NOTE:
-
Press the HELP button to print out a complete list of available functions. This list indicates the function capability of the VAG 1551 Scan Tool
(ST) only, and does not necessarily reflect the function capability of vehicle systems equipped with OBD. For instrument cluster address word 19,
do not attempt to select functions other than those listed above.
-
After the function is completed and forwarded with the button, the VAG 1551 Scan Tool (ST) returns to the following start position:
Check Control Module Version
Check control module version
indicated on display:
4Z7907357 autom. vert.aim.cont. D04
->
Coding 00007
-
Upper line
Part no. of control module), System identification (automatic vertical headlight aim control system) Version number1)
-
Bottom line
Coding number2)
1) the part and version numbers may deviate from those indicated here, e.g. due to a different part number
2) dependant on drive layout
-
Press -> button.
If displayed:
Control module not responding!
HELP
-
Press the -HELP- button to print out an overview of all of the possible malfunction causes.
-
Enter address word 55 for automatic vertical headlight aim control system again after correcting malfunction and press Q button to confirm.
indicated on display:
