volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Technician Safety Information|Page 5630 > < Diagram Information and Instructions|Page 5627
Page 1
background image

Fuel Injector: Technician Safety Information

Safety precautions

WARNING!
Fuel system is under pressure! Before opening the fuel system, place rags under and around the connection then slowly release the fuel pressure
.

To reduce the risk of personal injury and/or damage to the fuel injection and ignition system, always observe the following:

-

Do not touch or pull off ignition wires when engine is running or turning at starting RPM.

-

Only disconnect and reconnect wires for injection and ignition system, including test leads, when ignition is turned off.

-

If it is desired to turn engine at starting RPM without starting it, for example during the compression test, pull connector (1) off power output stage
for ignition coil (2) and remove Fuel Pump (FP) fuse (28).

If special testing equipment is required during test drive, note the following:

-

Test equipment must always be secured to the rear seat and operated from there by a second person.

If test and measuring equipment is operated from the passenger seat, the person seated there could be injured in the event of an accident involving
deployment of the passenger-side airbag.

Technician Safety Information|Page 5630 > < Diagram Information and Instructions|Page 5627