Passat GLX V6 V6-2.8L (ATQ) (2001)
/Page-2207007.png)
-
Connect new connector to Spiral spring and route wiring to ensure they are not pulling on the connector.
-
Clear any stored Diagnostic Trouble Codes.
-
Retest wiring as outlined in this bulletin.
-
Check Display group 1 again.
-
Select "Go to" then select "Exit"
-
Reinstall trim cover.
-
Remove VAS 5056/2.
-
Reinstall Driver's side airbag (follow steps in Driver's side airbag unit, removing and installing in VESIS Repair Group 69.
